Medium Duty Lathe Machine
basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models
A four walled closed type with oil bath apron & Norton having a best quality gears, sliding & surfacing feeds can be engaged by tightening a star knobs & engaging leaver at appropriate position.
PRICE: ON REQUEST
Order by Phone
0671-2505250
Shipping Information Usually dispatched With In business days.
Technical Specifications
| Model | HML-4 | HML-6 | ||
|---|---|---|---|---|
| SPECIFICATION | 4’.1/2”(1370 MM) | 6’.00”(1825 MM) | ||
| INCH | MM | INCH | MM | |
| BED WIDTH | 11” | 279 | 11” | 279 |
| HEIGHT OF CENTRE OVER FLAT BED WAYS | 8” | 203 | 8” | 203” |
| MAXIMUM SWING OVER BED | 16”” | 405” | 16”” | 405” |
| MAXIMUM SWING OVER CROSS LIDE | 9” | 228” | 9” | 228” |
| MAXIMUM SWING IN GAP | 23” | 580” | 23” | 580” |
| ADMIT BETWEEN CENTRE | 25″ | 635 | 34″ | 860” |
| SPINDLE NOSE | 6TPI | 6TPI | ||
| NUMBER OF SPINDLE SPEED | 6” | 6” | ||
| DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
| DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
| INCH RANGE THREADS | 4 TO 60 TPI | 4 TO 60 TPI | ||
| METRIC RANGE THREADS | 0.5 TO 7.5 MM | 0.5 TO 7.5 MM | ||
| LED SREW DIA & PITCH | 1.1/4” | 31.75 | 1.1/4” | 31.75 |
| FEAD SAFT DIA | 7/8″ | 22.22 | 7/8″ | 22.22 |
| TAIL STOCK SPINDLE TAPER BORE | Mt4 | Mt4 | ||
| TAIL STOCK SPINDLE TRAVEL | 5.1/2 | 140 | 5.1/2 | 140 |
| POWER REQUIRED | 2 HP 1440 RPM | 2 HP 1440 RPM | ||
| APPROX WEIGHT | 650 KG | 750 KG | ||
| OPTIONAL ACCESSORIES | STANDARD ACCESSORIES | APPLICATIONS |
|---|---|---|
| 1. Electric Motor | 1. SAFE GUARD | 1. MINI TOOL ROOM |
| 2. Starter or Electric Coolant Pump | 2. MOTOR RAILS & PULLEY | 2. EDUCATIONAL INSTITUTES |
| 3. 4jaw independent chuck | 3. CHANGE GEAR SET | 3. INDUSTRIAL TRAINING CENTRES |
| 4. 3jaw self centering chuck | 4. SWITCH STAND | 4. ENGINEERING COLLEGES |
| 5. Gears to cut metric threads | 5. THREAD DIAL | 5. DIPLOMA COLLEGES |
| 6. Taper turning attachment | 6. SQUARE TOOL POST | |
| 7. Tool post grinder & Double Gap or Triple Gap etc. | 7. DEAD CENTER NO-2 | |
| 8. SPINDLE SLEEVE |